Konica Minolta bizhub PRESS C1060 - Manual (Page 208)

Parameter Option Description
● Trim
● Priority Print
● Clicking Shift Settings enables you to shift the image on your
cover horizontally and vertically.
Print order Collation Collated—Prints a complete copy of the job before the first page of
the next copy is printed.
Delivery Sets the print order from back to front.
● Face up—Delivers the job face up.
● Face down—Delivers the job face down.
Print order Provides the following options:
● 1 to N—Prints a complete copy of the job from the first page to
the last page.
● N to 1—Prints a complete copy of the job from the last page first
in the stack, to the first page, last in the stack.
Near-Line
Finisher Device Enables you to select one of the near-line finishing devices, Duplo
DC-645, DSF-2000, or DSF-5000.
● Duplo DC-645 finisher cuts, slits, and creases documents using
registration marks and barcodes.
Note: A barcode is used only if you want to use a preset job
number. Otherwise, you can select it manually on the Duplo
DC-645.
● DSF-2000 finisher is a sheet feeder that is configured with a
barcode reader.
● DSF-5000 finisher is a sheet feeder that is configured with a
barcode reader.
Inverter Select Inverter when processing a stack in which the first page is
face down and on the bottom of the stack.
Note: Clear Inverter for a stack whose first page is face up on the
bottom of the stack.
Generate
registration
mark Select Generate registration mark to print registration marks on
sheets.
198 Chapter 11—Job parameters