Konica Minolta bizhub PRESS C1060 - Manual (Page 162)

Parameter Option Description
CMOCA defaults Enables you to adjust the AFP color settings.
Provides the following options:
● Use tone transfer curve settings
● Use ICC profiles embedded in objects
container data
In case Audit profiles is equal to instruction
profile:
● Use direct path
● Perform Color Management
Color mode CMYK Prints the job in color using the cyan, magenta,
yellow and black toners. This is the color mode set
for printing all jobs.
Grayscale Prints the job as black and white using black only.
The cyan, magenta, and yellow separations are also
printed in black toner, giving a dense appearance
similar to the CMYK grayscale image.
Note: Specify Grayscale images created in RGB
applications, such as Microsoft PowerPoint, as
monochrome or select Grayscale in the PPD file
when you submit to the system. This selection
ensures that the system treats grayscale images as
black and white instead of color in both the IC-309
print controller and in the printer billing meters.
Color adjustments Brightness Controls the brightness level for the job. The options
range from Lightest, which makes the job 15%
lighter to Darkest, which makes the job 15% darker.
Brightness is generally used to make last-minute
adjustments to the job after proofing. By changing
the Brightness setting, you can control how light or
dark your output appears.
Contrast Controls the difference between the light tones and
the dark tones in your image. The options range from
Less, which makes the job 10% lighter to More,
which makes the job 10% darker. Contrast is
generally used to make last-minute adjustments to
the job after proofing. By adjusting the Contrast
setting, you can control the difference between the
light tones and the dark tones in your image.
152 Chapter 8—Production workflows