Konica Minolta bizhub PRESS C1060 - Manual (Page 183)

11
Job parameters
Print tab in the job parameters window
Edit print parameters for your job.
Parameter Option Description
Paper stock Paper stock Provides the following options:
● Parameters from file—Maps the paper parameters according to
one of the following options:
○ Paper profile available in the trays
○ Auto rule set
○ Custom rule set
Clicking File mapping displays the mapping results and enables
you to edit the parameters.
● Paper profile—The available paper profiles listed in the paper
profile library. Clicking .... enables you to select a predefined
paper profile from the Resource Center window and check that
the paper profile is loaded in the printer
○ Paper size—The available paper sizes
Note: If the selected paper stock and size are not loaded in
one of the connected trays, the current job is held until the
appropriate set is available. The job receives an on hold
status indicator, and a message appears in the Message
Viewer window. Other jobs can be printed while jobs are held..
○ Media Type—The media type that you want to use. When the
default setting, Use Printer settings is selected, your job is
printed on the media type that is defined on the printer.
○ Weight—The media weight that you want to use. When the
default setting, Use Printer Settings is selected, your job is
printed on the paper weight that is defined on the printer.
○ Punched—Enables you to print your job on pre-punched
paper.
○ Colored—Enables you to print your job on colored paper.
○ Gloss mode—Enables you to activate the gloss option on the
press.
● Tray—The specific paper stock that you want to use is loaded in
this tray