Konica Minolta bizhub PRESS C1060 User Manual
Page 45
Advertising
7. Collect the chart from the printer.
8. Trim (cut) the edges of the i1 iSis calibration chart along the
dotted lines.
9. Click Next.
The Measure Calibration page of the Calibration wizard
appears. In this step you start to scan the calibration chart so
that the device can measure each separation and find the
point at which the toner appears on the paper.
Creating calibration tables with the X-Rite i1/i1iO/iSis spectrophotometer
35
Advertising
This manual is related to the following products: