Konica Minolta bizhub PRESS C1060 - Manual (Page 160)

Parameter Option Description
Image halftone screen Provides the following options:
Note: If you select the Dot 2, Line 1 or Line 2
options for a job that will be printed, make sure that
you also select Permission in the Image Quality
Setting screen on the printer's touch panel.
● Dot 1—Applies a high dot-type screen
● Dot 2—Applies a medium dot-type screen
● Line 1—Applies a high line-type screen
● Line 2—Applies a medium line-type screen
● Stochastic—Stochastic screening differs from
conventional halftone screening in that high ink
density results in more dots, not bigger dots. Low
ink density produces fewer dots, not smaller dots.
As stochastic screening involves millions of
minuscule dots, many more than are used for
conventional halftone screening.
Notes:
● If the Stochastic option is selected, make sure
that the Text Thinning, Text Smoothing, and
Halftone Text Enhancement options are not
selected and that the Resolution option is set to
600 dpi.
● If the Resolution option is set to 1200 dpi, make
sure that Image screening and Text/graphics
screening options use the same settings.
150 Chapter 8—Production workflows