Konica Minolta Magicolor 7300 - Manual (Page 120)

Replacing Media Pickup and Separator Rollers 112
5
Remove the C-clip securing the media pickup roller.
6
Remove the, collar and the media
pickup roller from the shaft.
7
Remove the new media pickup roller
from its packaging.
8
Place the used media pickup roller in the box and plastic bag that the new
roller came in.
WARNING!
Do not throw it into a fire.
Attention
Dispose of the used media pickup roller in accordance with local
regulations.
9
Slide the collar and the new
media pickup roller onto the
shaft as far as possible, making
sure that the notch in the shaft at
the front of the media pickup
roller can be seen.
During installation, be
careful not to touch the
surface of the roller.