Konica Minolta Magicolor 7300 - Manual (Page 148)

Duplex Unit Kit 140
2
Remove the connector cover at
the right rear of the printer.
We strongly suggest that
you save the connector
cover in case you ever
need to move or ship the
printer.
3
While pressing down the release
levers (one on each side) for the
manual feed tray, align the manual
feed tray with the guides on the
printer, and then attach it .
4
Reconnect the power cord, and then turn on the printer.
In compliance with UL guidelines, the appliance inlet is considered
to be the main disconnect device.
5
Configure your driver for the new manual feed tray and duplex unit option
(see “Working with the Printer Driver” ).