Media specifications 13 – Konica Minolta Magicolor 7300 User Manual
Page 21
Media Specifications
13
What amount of media can I use?
Attention
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
What Is the guaranteed imageable (printable) area?
Each media size has a specific imageable area,
the maximum area on which the printer can print
clearly and without distortion.
This area is subject to both hardware limits (the physical media size and the
margins required by the printer) and software constraints (the amount of
memory available for the full-page frame buffer). The guaranteed imageable
(printable) area for all media sizes is the page size minus 0.197 inch (5 mm)
from all edges of the media, except for media (such as custom media) with a
width of 12.25 inch (311 mm), which is 0.275 inch (7 mm).
Envelopes also have a nonguaranteed flap area that varies with envelope
type.
a
a
a
a
Printable
Area
a = 0.197 inch (5 mm)
Guaranteed
area
Nonguaranteed area
Nonimageable area 0.197 inch (5 mm)