Konica Minolta Magicolor 7300 - Manual (Page 218)

Control Panel Messages 210
Service Call Messages
A service message sometimes occurs as a result of an unusual combination
of events, not because of an actual problem. When the printer stops and a
service message displays in the message window, turn the printer off and
then back on. This often clears the service message indicator, and printer
operation resumes. Always try this before making a service call.
Service calls should be placed to the vendor from whom you purchased the
printer. If you cannot get service from your vendor, see the Service & Support
Guide for a list of sources of service and support for many areas of the world.
For the most up-to-date information globally, check www.konicaminolta.net/
printer/.
Default PostScript Error Report
If your printer is having trouble printing when using PostScript emulation, you
should turn on the Error Handler in the control panel menu. Error Handler is a
diagnostic tool that identifies PostScript errors encountered during a print job.
This service
message... means... do this...
SERVICE CALL N X An error has been
detected with the item
indicated “
X ” in the
service message.
“ N ” indicates the
message ID.
Reboot the printer. This
often clears the service
message, and printer
operation can resume.
If the problem persists,
contact Technical
Support. See the
Service & Support
Guide for a list of
sources of service
and support for many
areas of the world.
For the most up-to-
date information
globally, check
www.konicaminolta.net/
printer/.
Menu Sys Default/PostScript/Error Report
Choices Yes—Load the Error Handler on reboot.
No—Don’t load the Error Handler on reboot.
Default Yes