Konica Minolta Magicolor 7300 - Manual (Page 36)

Loading Media 28
1
Load up to 50 transparencies face up, long edge first.
2
Adjust the media guides to the width of the transparency.
3
In the printer driver, select OHP (Transparency) and the appropriate size.
4
Print the job.
Remove transparencies as soon as possible from the output tray to avoid
static buildup.
Transparencies may be bent
in the output tray, depending
on the type of transparency
and the operating
environment. To improve
stacking of transparencies,
put the media output tray
extension in place before
printing.
Trays 2–4
Only plain, recycled, letterhead, or memo paper in sizes A3, A4, B4, B5 (JIS),
11 x 17, legal, and letter can be printed from Trays 2–4. If you want to use
media other than plain paper, use Tray 1or the manual feed tray.
We recommend replenishing the media only after all of the media in the tray
has been used; otherwise, a media jam may occur.
Follow the instructions below to load Tray 2. Trays 3 and 4 are loaded the
same way.
1
In the printer driver, choose the tray you want to print from, or choose
Automatically Select.