Konica Minolta Magicolor 7300 - Manual (Page 35)

Loading Media 27
1
Load up to 50 postcards face up with the short edge first.
2
Adjust the media guides.
3
In the printer driver, select Postcard side1 and the appropriate size.
4
Print the postcards.
5
You cannot autoduplex postcards. If you want to manually duplex, load
the postcards blank side down in Manual feed tray. In the driver, select
Postcard side2.
6
Print the second side.
Thick Stock
Test all thick stock to ensure acceptable performance and to ensure that the
image does not shift.
1
Load up to 50 thick stock sheets face up.
2
Adjust the media guides.
3
In the printer driver, select Thick Stock and the appropriate size.
4
Print the job.
Transparencies
Format the information to be printed on the transparencies within your
application. Try printing your data on a plain sheet of paper first to check
placement.
If you touch the face of the transparencies with your bare hands, print
quality may be affected. Do not fan transparency media before loading
it. Resulting static electricity may cause printing errors.
You can print transparencies continuously. However, this could affect the
media feed, depending on the media quality, static buildup, and printing
environment. If you have problems loading a large number of transparencies
at a time, try loading only 1–10 sheets (Tray 1) or only 1 sheet at a time
(manual feed tray).