Konica Minolta Magicolor 7300 - Manual (Page 138)

BuzzBox (Americas only) 130
What's in the Kit?
The BuzzBox kit contains the following items:
BuzzBox
Interface box
RJ-11 cable
Power adapter
Adhesive-backed clips
Installing BuzzBox
1
Turn off the printer, and unplug the power cord.
Attention
Unplug the power cord from the printer, not from the outlet.
2
If you have a cable attached to the printer’s parallel port, unplug it from
the printer.
3
Attach one end of the parallel cable on the interface box to the printer’s
parallel port.
The BuzzBox’s ribbon cable is
designed to be directly
attached to the printer’s
parallel port, not to an adapter
or an additional cable.
4
Use the included RJ-11 cable
to connect BuzzBox to the
interface box.
5
Choose a good location on the
printer to mount the interface
box. Make sure that the unit
does not
interfere with paper exiting
the printer.
cover any vents, doors,
connectors, or labels.
cause the BuzzBox ribbon
cable to stretch or twist.