Konica Minolta Magicolor 7300 - Manual (Page 246)

Working Safely with Your Laser Printer 238
Printer Body
Do This...
Perform only the procedures that are described in this manual. Using the
machine improperly can result in a fire or an electric shock.
Notes on your safety and operating safety
Working improperly with the printer can result in health hazards, electric
shocks, and even fires. You should make yourself familiar with all of this
safety information.
If the machine becomes unusually hot, or if you notice smoke or an unusual
odor coming from the machine, switch it off immediately and remove the
power cord from the socket.
DO NOT...
Do not place:
Heavy objects on the machine.
Magnetic objects near the machine.
Coffee cups, drinks, bottles, or other containers with liquids in them on
the machine. If liquid enters the machine the result could be an electric
shock or a fire. If liquid does get into the machine, switch it off immedi-
ately, disconnect the power cord.
Paper clips, staples, or other small metal objects into openings on the
machine. The result could be an electric shock or a fire. If metal pieces
are fed into the machine, switch it off immediately, disconnect the power
cord.
Do not open any covers on the machine while printing is in progress.
Do not use any flammable sprays, liquids or gases in the vicinity of the
machine.
Do not remove any safety devices and do not alter the construction of the
machine. The unit is equipped with high-voltage components. Using the
machine improperly can result in a fire or an electric shock.