Konica Minolta Magicolor 7300 User Manual
Page 141
Dual In-Line Memory Module (DIMM)
133
3
Use an antistatic wrist strap or
touch the area of the printer frame
indicated in the illustration.
4
If you need to remove an existing
DIMM, using both thumbs, pull the
latches (one on each side of the
DIMM connector) outward.
Lift the DIMM straight out of the
DIMM connector.
5
To insert a new DIMM, observe the
keyed (notched) side of the new
DIMM and align it with the
connector.
6
Fully insert the DIMM straight into
the DIMM connector until the
latches, one on each end of the
socket, snap into the locked
position.
If you cannot snap the DIMM into place, do not push it with
extreme force. Reposition it and reinsert it perpendicular to the
socket, making sure that the DIMM is seated completely and firmly
in the connector.