Konica Minolta Magicolor 7300 - Manual (Page 154)

Internal IDE Hard Disk Drive 146
Internal IDE Hard Disk Drive
WARNING!
Make sure that the printer and all accessories are turned off before
installing accessories involving the controller board.
One optional internal IDE hard disk is supported:
Required for collation.
Enables permanent storage of downloaded fonts, color profiles, and
overlays.
Required for direct printing of PDF files.
Installing the Internal Hard Disk
Attention
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 129. In addition,
always handle circuit boards by the edges only.
When installing or removing a hard disk, make sure that the metal
support posts (on the hard disk) don’t hit any of the electrical leads on
the chips mounted on the controller board. The controller board will not
function if any of the leads are broken or shorted together.
1
Turn off the printer, and unplug the power cord and interface cable(s).
2
Remove the hard disk drive from
its box and from the protective
bag.