Konica Minolta Magicolor 7300 - Manual (Page 31)

Loading Media 23
Loading Media
How do I prepare media?
Do not unwrap paper on top of the printer, as this might cause paper
particles to fall into the printer.
If you are using paper, remove the top
and bottom sheets of a ream of paper.
Fan the stack of media to prevent static
buildup before inserting it in trays 1–4.
Do not fan transparencies.
Attention
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
Do not mix media of different sizes, types, and/or weights, as this will
cause media jams.
When loading additional media or refilling media, remove any media
remaining in the tray, place it on top of the new media of the same size and
type, and then align the media in the stack before loading it into the tray. We
recommend refilling the media only after all of the media in the tray has been
used; otherwise, a media jam may occur.
Tray 1: Universal media tray Trays 2–4: Standard Manual feed tray
media trays