Konica Minolta Magicolor 7300 - Manual (Page 72)

Using PostScript Drivers in Windows NT 64
Using PostScript Drivers in Windows NT
Displaying the Tabs
1
From the Start menu, choose Settings and then Printers to display the
Printers directory.
2
Right-click the KONICA MINOLTA magicolor 7300 printer icon.
3
Choose Properties.
4
Choose the Settings tab.
Using the Print Setting Tabs
General printer controls are located in tabs of the main printer driver dialog
box. These controls let you check the status of consumables and set access
to optional features including the lower feeder tray, the duplex option, and the
internal hard drive.
There are two ways to access the specialized print setting tabs:
Through your application. This selects printer settings for the specific job
you are sending. Choose Print and then choose Properties.
Through the printer driver dialog box. This changes printer settings for all
subsequent print jobs until you change the settings again through the
printer driver. Choose Start/Settings/Printers, select the magicolor 7300
icon and then choose the Document Defaults menu. The tabs in the new
Document Default dialog box are described here.
Refer to the printer driver’s online help for information on all of these
functions.
Page Setup Tab
This tab allows you to:
Set the media size
Select the media source
Set the orientation for a print job
Set the number of copies
Select black-and-white or color printing
Set collation