1 selecting copy setting 1, 2 setting the tray priority, 3 specifying the quality priority – Konica Minolta Bizhub 215 User Manual

Page 108: Selecting copy setting 1 -21, Setting the tray priority -21, Specifying the quality priority -21, P. 6-21

Advertising
background image

bizhub 215

6-21

6.7

COPY SETTING 1

6

6.7.1

Selecting COPY SETTING 1

1

Press the Utility key.

The Utility screen appears.

2

Use +, to select [COPY SETTING 1], then press OK.

The COPY SETTING 1 screen appears.

6.7.2

Setting the tray priority

1

Select [COPY SETTING 1].

% For details on selecting [COPY SETTING 1], refer to page 6-21.

2

Use +, to select [PAPER PRIORITY], then press OK.

3

Use +, to select a target tray, then press OK.

% If Bypass Tray is installed, the following screen appears.

This returns to the COPY SETTING 1 screen.

Tips

-

If the same size and type of paper as that in the priority tray is loaded into multiple trays and they have
run out of paper, a message may appear to notify you to replenish the trays other than the priority tray
with paper. If the message appears, replenish paper according to the on-screen instructions.

6.7.3

Specifying the quality priority

1

Select [COPY SETTING 1].

% For details on selecting [COPY SETTING 1], refer to page 6-21.

2

Use +, to select [QUALITY PRIORITY], then press OK.

Advertising