Konica Minolta Bizhub 215 - Manual (Page 96)

bizhub 215 6-9
6.3 Tray Settings 6
6.3 Tray Settings
Using Tray Settings, you can change the settings for each tray.
<Items for Tray Settings>
6.3.1 Selecting tray settings
1
Press the Utility key.
The Utility screen appears.
2
Use +, to select [PAPER SOURCE SETUP], then press OK.
The Tray Settings screen appears.
6.3.2 Setting the unit of the paper size
1
Select [PAPER SOURCE SETUP].
% For details on selecting [PAPER SOURCE SETUP], refer to page 6-9.
2
Use +, to select [TRAY1], then press OK.
3
Use +, to select [PAPER SIZE], then press OK.
4
Use +, to select [INCH/METRIC], then press OK.
No. Settings Description
1 [TRAY1] Specify the size, unit, and type of the paper to
be loaded in Tray 1. Select the paper size from
[AUTO], [A6w(A6 CARD)], [A6w], [B4w], [B5v],
[B5w], [B6w], [INVw], [INVv], [EXEv], [EXEw],
[INCH/METRIC], [SIZE INPUT], [MEMORY1],
and [MEMORY2]. If you have selected
[SIZE INPUT], enter the page size
(X: 140 mm to 432 mm, Y: 90 mm to 297 mm).
Set the paper unit at [INCH/METRIC]. Select the
paper type from [PLAIN], [RECYCLE], [1-SIDE],
[SPECIAL], [TRANSPARENCY], [CARD1],
[CARD2], [ENVELOPE], [PLAIN 2-SIDE],
[CARD1 2-SIDE], [CARD2 2-SIDE], and [RECY.
2-SIDE].
•
The factory default is [AUTO], [PLAIN], and
[METRIC].
2 [TRAY2] Specify the unit of the paper size and paper
type. Select in what unit of paper size is used,
inches such as Letter or centimeters (metric
size) such as A4 and B5. If the setting is not ap-
propriate, the paper size is not automatically de-
tected.
Select the paper type from [PLAIN], [RECYCLE],
[1-SIDE], and [SPECIAL].
•
The factory default is [PLAIN] and [METRIC].
3 [TRAY3] Same as TRAY2.
4 [TRAY4] Same as TRAY2.
5 [TRAY5] Same as TRAY2.