Konica Minolta Bizhub 215 - Manual (Page 98)

bizhub 215 6-11
6.3 Tray Settings 6
6
Use +, to select the paper type, then press OK.
This returns to the Tray Settings screen.
6.3.4 Configuring settings for Tray2 to Tray5
1
Select [PAPER SOURCE SETUP].
% For details on selecting [PAPER SOURCE SETUP], refer to page 6-9.
2
Use +, to select a target tray, then press OK.
3
Use +, to select [INCH/METRIC], then press OK.
% For details on setting the unit of the paper size, refer to page 6-9.
4
Use +, to select [PAPER TYPE], then press OK.
5
Use +, to select the paper type, then press OK.
This returns to the Tray Settings screen.