Konica Minolta BIZHUB PRO 1050 - Manual (Page 150)

7
PCL Printer Driver Setting (Windows)
7-21 bizhub PRO 1050
Binding - Hole-Punch
The output paper can be set to be punched with 2 holes, 3 holes or 4 holes.
Punch holes which can be specified vary depending on the destinations.
x USA: Either 2 or 3 holes can be specified.
x Others: Either 2 or 4 holes can be specified.
The position will be changed according with the [Binding Position] setting.
The [Hole-Punch] cannot be set in the following cases:
x When [Multi Folder] is not available in [Options] tab.
x When an item other than [Z-fold] is selected in [Special Function] tab -
[Fold].
x When [Booklet] is selected in [Setup] tab - [Print Type].
Binding - Center Staple and Fold
Staples at the center of the output paper and folds it into half.
The [Center Staple and Fold] cannot be set in the following cases:
x When [Saddle-Stitcher] is not available in [Options] tab.
x When an item other than [Multi Center Fold] is selected in [Special Func-
tion] tab - [Fold].
x When [Booklet] is not selected in [Setup] tab - [Print Type].
2 Holes / Left Binding
(Portrait)
2 Holes / Left Binding
(Landscape)
2 Holes / Right Binding
(Landscape)
2 Holes / Right Binding
(Portrait)
ABCD ABCD
2 Holes / Top Binding
(Portrait)
2 Holes / Top Binding
(Landscape)
ABCD
ABCDEF ABCDEF
ABCDEF