Konica Minolta BIZHUB PRO 1050 - Manual (Page 318)

11
PS3 Printer Driver setting (Mac OS X)
11-20 bizhub PRO 1050
Back Cover Page
Sets a back cover for which paper is different than the text paper.
The [Back Cover Page] cannot be set in the following cases:
x When the [Transparency] is selected in the [Print] - [Setup] - [Media Type]
x When the [Collated] is not available in the [Print] - [Copies & Pages]
x When the [Pages per Sheets] is selected in the [Print] - [Layout]
Back Cover Tray
Specifies the paper tray for the back cover.
PI Front Cover
Sets a front cover for which paper is from the [PI Tray 1] or [PI Tray 2].
PI Back Cover
Sets a back cover for which paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Front Cover] or [PI Back Cover] cannot be set in the following cases:
x When the [None] is selected for [Multi Folder] in the [Printer Info] window.
x When the [Transparency] is selected in [Print] - [Setup] - [Media Type].
Transparency Interleave
Sets this when you want to use [Transparency Interleave] as paper. Select
either [Blank Sheet] or [Printed].
The [Transparency Interleave] cannot be set in the following cases:
x When [Transparency] is not set in [Media Type] of the [Setup] window.
Paper Tray (Transparency Interleave)
Sets this when you want to use the paper feed tray for [Transparency Inter-
leave].
[Paper Tray (Transparency Interleave)] cannot be set in the following cases:
x [Transparency] is not set in [Media Type] of the [Setup] window.
x [Transparency Interleave] is not set in the [Setup] window.
ABCD ABCD
ABCD ABCD
ABCD
ABCD
ABCD
ABCD ABCD
ABCD ABCD
ABCD
ABCD
ABCD
ABCD ABCD
ABCD
ABCD ABCD
Back Cover - Off Back Cover
- Blank
Back Cover
- Printed