Konica Minolta BIZHUB PRO 1050 - Manual (Page 233)

9
KONICA MINOLTA PS Printer Driver setting (Windows)
9-21 bizhub PRO 1050
data becomes wider.
Layout - N-up - Advanced - Size Orientation change handling
Determines the output method when a mixture of pages with different paper
sizes and printing orientations is used.
Layout - Booklet
Produces printouts that can be folded and bound into a booklet.
It is usually used in the [Defaults] condition.
Layout - Booklet - Gutter
When folding paper as a booklet, between 2 pages, specify in the range of 0
to 150 the margin to be set uniformly in dots.
Layout - Booklet - Creep
When folding paper as a booklet, specify in the range of 0 to 20 the page in-
tervals at the center of paper to be broadened in dots to the inside paper.
Layout - Booklet - Bundle Size
Allows you to specify the number of pages to bind into a booklet. The default
[No Limit] allows you to bind all printed sheets into a booklet.
Layout - Booklet - Advanced
Layout - Booklet - Advanced - Fill Bundles
If [8], [12] or [16] is specified for [Bundle Size] and there are fractional pages,
many blank pages may be generated depending on the number of pages to
be output. In such a case, by keeping the field [Fill Bundles] OFF, 4, the
smallest value, is selected as the [Bundle Size] only for the fractional pages
so that waste blank pages are saved.
[When [Bundle Size] is set to 8 and [Fill Bundles] is OFF]
1 2 8 9
A4/B5/A5 A3/B4/A4
3 blank pages
A3/B4/A4
1
2
9 Blank
3
4
A3/B4/A4
7
5
6
8
Blank Blank