Konica Minolta BIZHUB PRO 1050 - Manual (Page 385)

14
Utility Tool
14-39 bizhub PRO 1050
Setting Up an HP-UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to the network interface
card using the lpd of the network interface card. To do this:
1
At the prompt, type:
sam
2
When a window appears, select [Printer/Plotter Manager].
3
When the menu appears, select [List printer and plotters].
4
When a list appears, select [Actions] in the title bar.
5
From the pull-down menu, select [Add Remote Printer].
6
When a window appears, add values to configure the network interface
card.
See example below.
7
At the bottom of the screen, select [Remote Printer is on BSD system]
from the three choices available.
8
Click on the OK button.
9
Ping the unit to test communications. Type:
ping <IP address of the network interface card>
10
Ping should confirm your IP address with the message:
<IP address of the network interface card> is alive
11
If the connection is confirmed, you can now print.
Data Requested Example Description of Input Data
Printer Name myprinter name to be used in lp command
Remote System Name fastprint Network Interface Card hostname
as in /etc/hosts
Remote printer Name PORT1 lpd queue name