Konica Minolta BIZHUB PRO 1050 - Manual (Page 45)

3
Installation (Local printing)
3-17 bizhub PRO 1050
Installing to Windows XP (PCL6/PS3)
To install the PCL6/PS3 printer driver to Windows XP, perform the following
steps. The installation should be performed by a qualified system adminis-
trator or printer administrator.
DETAILS
In case you install the PCL driver, you can check the location of the [.inf]
file through the bizhub PRO 1050/1050P CD-ROM start-up screen.
1
Turn on the computer and start Windows XP.
2
Log on as an administrator (or a user entitled to install a printer).
- Exit from all active Windows applications, if required.
3
Click [Start] of the task bar. Then, select [Printers and Faxes] of the
Start menu.
The [Printers and Faxes] window appears.
4
Click [Add a printer] icon of the [Printers and Faxes] window.
The [Add Printer Wizard] window will appear to add the printer.
5
Click [Next].
The [Add Printer Wizard] window to
select the printer connection ap-
pears.
6
Select [Local printer attached to this
computer].
- When the printing system is di-
rectly connected to a computer
in which the printer driver will be
installed, select [Local printer at-
tached to this computer]. When
the printing system is managed
in a computer in which the print-
er driver will be installed, also se-
lect [Local printer attached to this computer].
- When selecting the [Local printer attached to this computer], turn
"off" [Automatically detect and install my Plug and Play printer] set-
ting "off".