Konica Minolta BIZHUB PRO 1050 - Manual (Page 384)

14
Utility Tool
14-38 bizhub PRO 1050
Setting Up an AIX 4.0 System
Use these procedures to install the network interface card in a AIX 4.0 sys-
tem:
1
Run SMIT Printer.
2
Select [Print Spooling].
3
Select [Add a Print Queue].
4
Select [Remote].
5
Use [Standard Processing].
6
Assign a queue name.
7
Use the host address of the Network Interface Card for the Remote
System.
8
Use [PORT1] for the queue on the remote system.
9
Add a description (optional).
10
Press [Enter] to generate.
Installation is complete. Test your printer by executing the following
command:
lp -d<queue_name> <file_name>