Konica Minolta BIZHUB PRO 1050 - Manual (Page 383)

14
Utility Tool
14-37 bizhub PRO 1050
Setting Up an AIX version 2.5 Remote Printer to Use lpd
Use the following procedure to set up a remote printer on the host that sends
jobs to the network interface card using the lpd of the network interface card.
1
At the prompt, type:
#smit spooler <cr>
2
When a window appears, select [Manage Remote Printers].
3
When a menu appears, select [Client Services].
4
Another menu appears, select [Remote Printer Queues].
5
Another menu appears, select [Add a Remote Queue].
6
When a window appears, change the values shown to configure the
network interface card.
The values displayed are default values. You must replace the short
and long form filter values with the values shown in the following table.
7
After you have supplied all values, press Enter.
You can now print.
Data Requested Example Data Description
Name of queue to add print1 Name of local printer
queue Destination Host printfast NIC IP hostname
Short Form Filter /usr/lpd/bsdshort Required value
Long Form Filter /usr/lpd/bsdlong Required value
Name of remote printer
queue PORT1 Network interface card
Name of device to add print1 Name of local queue