Konica Minolta BIZHUB PRO 1050 - Manual (Page 209)

8
PS3 Printer Driver setting (Windows)
8-26 bizhub PRO 1050
The [Front Cover Page] cannot be set in the following cases:
x When the [Transparency] is selected in the [Paper/Quality] tab - [Media]
x When any item other than [Off] is selected for the [Fold].
Paper Tray (Front Cover Page)
Specifies the paper tray for the front cover.
Back Cover Page
Sets a back cover type.
When the [Blank] is selected, a blank sheet is inserted after the last page.
When the [Printed] is selected, the last page of the document is printed with
the specified sheet as the back cover.
The [Back Cover Page] cannot be set in the following cases:
x When the [Transparency] is selected in the [Paper/Quality] tab - [Media]
x When any item other than [Off] is selected for the [Fold].
Paper Tray (Back Cover Page)
Specifies the paper tray for the back cover.
PI Front Cover
Sets a front cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Front Cover] cannot be set in the following cases:
x When the [Multi Folder] is not selected in the [Device Settings] tab - [In-
stallable Options]
x When any item other than [Off] is selected for the [Fold].
PI Back Cover
Sets a back cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Back Cover] cannot be set in the following cases:
x When the [Multi Folder] is not selected in the [Device Settings] tab - [In-
stallable Options]
x When any item other than [Off] is selected for the [Fold Stitch Trim].
ABCD
ABCD ABCD
ABCD ABCD
ABCD
ABCD
ABCD
ABCD ABCD
ABCD ABCD
ABCD
ABCD ABCD
ABCD ABCD
ABCD ABCD
Back Cover - Off Back Cover
- Blank
Back Cover
- Printed