Konica Minolta BIZHUB PRO 1050 User Manual
Page 295
10
PS3 Printer Driver setting (Mac OS 9)
10-29
bizhub PRO 1050
Paper Tray (Back Cover Page)
Specifies the paper tray for the back cover.
PI Front Cover
Sets a front cover for which paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Front Cover] cannot be set in the following cases:
x
When the [None] is selected for [Multi Folder] in the [Installable Options]
field of the [Configure] dialog.
x
When any item other than [Off] is selected for the [Fold].
PI Back Cover
Sets a back cover for which paper is from the PI Tray 1 or PI Tray 2.
The [PI Back Cover] cannot be set in the following cases:
x
When the [None] is selected for [Multi Folder] in the [Installable Options]
field of the [Configure] dialog.
x
When any item other than [Off] is selected for the [Fold].
Transparency Interleave
x
Printed:
This is set when inserting the printed interleaf for the trans-
parent sheet.
x
Blank :
This is set when inserting the blank interleaf for the trans-
parent sheet.
Paper Tray (Transparency Interleave)
Uses to select the paper tray for Transparency Interleave.
The Paper Tray (Transparency Interleave) cannot be set in the following cas-
es:
x
When the [Transparency] is selected for [Media] in the [Print] - [Printer
Specific Options] dialog box (1).
x
When the [Paper Sources] is not selected in the [Configure] dialog
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. You can use this when printing a large volume document, such as
multiple sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
the [Printing] dialog box will appear.