Konica Minolta BIZHUB PRO 1050 - Manual (Page 66)

4
Installation (Network printing)
4-12 bizhub PRO 1050
10
In the [Printer name] textboxes,
check the printer name.
- If you want to change the printer
name, enter the new printer
name in the [Printer name] text-
boxes.
11
Select whether to use this printer as
the default printer or not by selecting [Yes] or [No].
Note
If you install a printer to the computer for the first time, [Default printer]
setting will not appear, and the first printer installed will be the default
printer.
12
Click [Next].
The [Add Printer Wizard] window to perform the test print appears.
13
Select Whether to perform the test
print or not by selecting [Yes (rec-
ommended)] or [No].
Note
Printing the test page is also possible
after the installation of the printer driv-
er.
14
Click [Finish].
- Necessary files will be copied from the "bizhub PRO 1050/1050P
CD-ROM or PS-502 CD-ROM" to complete the installation.
- If you have selected [Yes (recommended)] at step 13, performing of
the test print starts.
15
Make sure the test page printed properly.
- If you have selected [No] at step 13, the test page will not be print-
ed.
- If the test page is printed properly, click [Yes].
16
The installation is completed.
The printer driver of the printing system becomes available without re-
starting your computer.