Konica Minolta BIZHUB PRO 1050 - Manual (Page 24)

2
Overview
2-3 bizhub PRO 1050
2.2.3 Other options
The following options installed on the printer enables variable functions.
x Paper Source Option (PF-701) enables to select Tray 3, Tray 4 or Tray 5.
x Multi Folder Option (FD-501) enables to select “Punch”, “PI Cover
Sheet”, “Fold” function.
x Saddle Stitcher Option (SD-501) enables to select “Center Staple and
Fold” and “Trim”, “Fold” function. Saddle Stitcher Option cannot be in-
stalled when Stacker Option is installed.
x Stacker Option (LS-501 and/or LS-502) enables to stack of a lot of output
papers. Stacker Option cannot be installed when Saddle Stitcher Option
is installed.
x Stapler Option (FS-503) enables to select “Staple”, “Offset” function.
Note
Installing various options built in the copier properly on the printer driver
allows you to use a variety of printing functions shared by the copier.
Refer to "Option tab" on Page 7-10 for more information about installa-
tion of options.
2.3 Connections of the Print Controller
You can use the copier as a printer by connecting it to a computer (using with
Parallel connection) or a network (using with Ethernet connection).
Copier
PF-701 FD-501 SD-501 FS-503