Konica Minolta BIZHUB PRO 1050 - Manual (Page 367)

14
Utility Tool
14-21 bizhub PRO 1050
14.2 Using KONICA MINOLTA Peer to Peer Printing Tool
This printing system employs a method which sends the print job directly to
the print controller from the Windows 98/Me compliant computer, not
through the dedicated print server.
This is called peer-to-peer printing.
As KONICA MINOLTA Peer to Peer Printing Tool uses the network protocol
TCP/IP, the network interface card must be set up for TCP/IP in advance. For
each of the Windows 98/Me computers that perform peer-to-peer printing, it
is necessary to set up TCP/IP, install and set up [KONICA MINOLTA Peer to
Peer Printing Tool] included in the accompanying CD-ROM, and set up the
printer driver.
Installation of IP Peer-to-Peer
To install the KONICA MINOLTA Peer to Peer Printing Tool, double click [Set-
up.exe] in the [Peer2Peer] folder of the accompanying CD-ROM. The installer
will start. Install the program according to the instructions displayed on the
screen.
1
Insert the accompanying CD-ROM into the CD-ROM drive, and dou-
ble-click on [Setup.exe] in the "/Peer2Peer" folder.
2
Click [Next].
The [License Agreement] window
will appear.
3
Click [Yes].