Konica Minolta BIZHUB C30P - Manual (Page 110)

Configuring MetaConsole
page 96
Viewing Alarms in Unicenter
Note: The time that is displayed for each alarm is the time the MetaConsole server logged
that alarm, and is based on the MetaConsole server’s time.
To display alarm information in the 2-D Map, follow this procedure:
1 Double-click MetaConsole Devices.
2 In the sub-map that opens, double-click the icon for the individual server.
3 In the sub-map that opens, right-click the configuration node and, on the menu that ap-
pears, click Configure.
4 The MetaConsole client opens.
To display alarm information in the Topology view of Unicenter Explorer, follow this
procedure:
1 Double-click MetaConsole Devices node to expand it.
2 Double-click the icon for the individual server to expand it.
3 Right-click the configuration node and, on the menu that appears, click Configure.
4 The MetaConsole client opens.
To view alarms, follow this procedure:
1 In the navigation pane, expand the node of the MetaConsole server whose alarms you
want to check. Click View Alarms. If the database is not configured, a message indicates
that fact. Otherwise, the View Alarms screen opens (Figure 2.36). Alarm log information
for up to 50 alarms is displayed.