Konica Minolta BIZHUB C30P - Manual (Page 51)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 37
Specifying Alarm Notification Methods in OpenView
The list of events you want to trigger alarm notifications is configured individually for each
service provider at each MetaConsole server. How MetaConsole presents those alarms is
determined at the highest level of MetaConsole configuration.
To specify how MetaConsole notifies you of alarms, follow this procedure:
1 In the OpenView map, right-click a node that is managed by the MetaConsole OpenView
snapin, and on the menu that appears, click MetaConsole Configuration. A MetaConsole
client browser window opens (Figure 2.1).
2 In the navigation pane, expand the Configuration node and click Alarm Notification
Methods. The Alarm Notification Methods screen opens (Figure 2.3).
Figure 2.3: OpenView Alarm Notification Methods Screen
3 Select the check box for each notification method you want MetaConsole to use. A brief
description of each follows:
• Alert Box when an alarm occurs, a message will appear on screen, indicating the de-
vice name or IP address where the alarm originated.
• Audible Alarm when an alarm occurs, a audible beep will sound.
• Email when an alarm occurs, a formatted email providing information about the alarm
will be sent to specified recipients. (See “Specifying Email Notification Settings” on
page 38.)
• Pager when an alarm occurs, a formatted text page providing information about the
alarm will be sent to specified pagers.(See “Specifying Pager Notification Settings” on
page 40).