Konica Minolta BIZHUB C30P - Manual (Page 49)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 35
All configuration settings for the server or a service provider are maintained by the Meta-
Console server and are not client-specific. All clients use the same values; if any client
changes a particular setting, the change affects all clients that use that setting.
Refreshing Displayed Information in OpenView
You can manually update the MetaConsole information that is displayed in OpenView and in
the MetaConsole client (browser) window.
MetaConsole Client
To update displayed information, follow this procedure:
1 In the navigation pane, right-click the node whose information you want to update.
2 In the menu that appears, click Refresh.
• Refreshing a service provider gets a new list of discovered devices.
• Refreshing a specific page of device information updates the information on that page.
Configuring the Server List in OpenView
Adding a MetaConsole Server
To add to the list of MetaConsole servers, follow this procedure:
1 In the OpenView map, right-click a node that is managed by the MetaConsole OpenView
snap-in. On the menu that appears, click MetaConsole Configuration. A MetaConsole
client browser window opens (Figure 2.1).
Figure 2.1: MetaConsole Client Browser Window
2 In the navigation pane, expand the Configuration node and click Server Discovery. The