Konica Minolta BIZHUB C30P - Manual (Page 30)

Installing MetaConsole
page 16
8 [MetaConsole Server] Specify a TCP/IP port number. Click Next.
9 [Windows NT, 2000, 2003 and XP] [MetaConsole Server] If MetaConsole is to run as a
Windows NT, 2000, 2003 or XP service, select the Run as Service check box. Click Next.
10 If you chose to run MetaConsole as a Windows service, specify if it is to be started
automatically at system startup or manually, by clicking the appropriate radio button. Click
Next.
11 [Client for HP OpenView] Enter the name/address of the MetaConsole server host that
the client for HP OpenView will use. Optionally, specify a port number by following the
name or address with a colon and a number. For example, ServerMachineName:8080.
When finished, click Next.
12 [Windows] [Client for HP OpenView] Click Choose... then browse to the folder where
the HP OpenView Network Node Manager is installed. For example, C\Program File\HP
OV\NNM. Select the folder then click Next.
13 The Pre-Installation Summary screen opens. This screen lists the installation options
you have selected. If any options are incorrect, click the Previous button to return back
and edit your selection(s). When you have completed this, return to the Pre-Installation
Summary screen, reverify your new settings, then click Install.
14 The Installation Progress screen appears as MetaConsole installs.
15 When installation finishes, a final screen appears, notifying you that the installation has
been successfully completed.
16 Click Done to exit the Installation program.
Starting the MetaConsole Server after Installation
Note :The MetaConsole installation procedure does not start the MetaConsole server. To
use the MetaConsole Server immediately after installation, you must manually start it.
To manually start the MetaConsole Server on Windows, follow this procedure:
1 Click the Start button, point to Programs then point to PageScope EMS Plug-Ins.
2 Do one of the following:
• To run the MetaConsole Server as a program, click Run PSEMS.
• To run the MetaConsole Server as a Windows NT service, click StartService.
To manually start the MetaConsole Server on HP-UX, Linux and Solaris, follow this procedure:
1 Change to the installation directory.
2 Execute ./Run PSEMS.