Konica Minolta BIZHUB C30P - Manual (Page 85)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 71
1 In the navigation pane, expand the top-level Configuration node and click Server Dis-
covery.
The Server Discovery screen opens (Figure 2.20).
2 In the Server’s box, click the address of the MetaConsole server you wish to remove from
the list.
3 Click Remove.
4 In the Warning dialog box, click Yes to refresh the navigation pane to include the new
server information. If you click No, you must manually refresh the navigation pane infor-
mation. For instructions see “Refreshing Displayed Information in MMC” on page 69.
The server is removed from the list and from the navigation tree.
Specifying Alarm Notification Methods in MMC
The list of events that trigger alarm notifications is configured individually for each service
provider at each MetaConsole server. How MetaConsole presents those alarms is determined
at the highest level of MetaConsole configuration.
To specify how MetaConsole notifies you of alarms, follow this procedure:
1 In the navigation pane, expand the top-level Configuration node and click Alarm Notifi-
cation Methods.
The Alarm Notification Methods screen opens (Figure 2.21).
Figure 2.21: MMC Alarm Notification Methods Screen