Konica Minolta BIZHUB C30P - Manual (Page 41)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 27
After entering the name, click Next.
14 The Pre-Installation Summary screen opens. This screen lists the installation options
you have selected. If any options are incorrect, click the Previous button to return back
and edit your selection(s). When you have completed this, return to the Pre-Installation
Summary screen, reverify your new settings, then click Install.
15 The Installation Progress screen appears as MetaConsole installs.
16 When installation finishes, a final screen appears, notifying you that the installation has
been successfully completed.
17 Click Done to exit the Installation program.
Starting the MetaConsole Server after Installation
Note :The MetaConsole installation procedure does not start the MetaConsole server. To
use the MetaConsole Server immediately after installation, you must manually start it.
To manually start the MetaConsole Server on Windows, follow this procedure:
1 Click the Start button, point to Programs then point to PageScope EMS Plug-Ins.
2 Do one of the following:
• To run the MetaConsole Server as a program, click Run PSEMS.
• To run the MetaConsole Server as a Windows NT service, click StartService.
To manually start the MetaConsole Server on HP-UX, Linux and Solaris, follow this procedure:
1 Change to the installation directory.
2 Execute ./Run PSEMS.