Konica Minolta BIZHUB C30P - Manual (Page 145)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 131
Settings Page
From the Settings page a user may input or modify specific Device settings for the selected
device. Certain devices may also display selected Finisher Settings (as shown in Figure 3.12).
Note : Modification of values on this page requires that the user has set up the Write Com-
munity String for this device correctly on the Write Community Page.
To access this page, follow this procedure:
1 In the Tree Pane, expand the device’s node.
2 Click on Settings. The Settings page will open in the right pane (Figure 3.12).
Figure 3.12: Settings Page
Changing Device Settings
To modify a device’s settings, follow this procedure:
1 In the Tree Pane, expand the device’s node.
2 Click on Settings.
3 In the Device Name field, enter a name for the device.
4 In the Location field, enter a description of the device’s location.
5 In the Contact Name field, enter the name of the person who is in charge of the device.
6 In the Contact Number field, enter the phone number of the contact person.