Konica Minolta BIZHUB C30P - Manual (Page 55)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 41
6 In the Subject box, type the text that will appear in the Subject field of all page messages
sent by MetaConsole. Typically, this text should indicate the type of message (e.g., Device
Alert).
7 In the Relay Server box, type the name or IP address of the local network’s pager terminal.
Note: An alarm notification page cannot be delivered if this information is missing or in-
correct.
8 To send a test page to the recipients specified in steps 4, 5, and 6, select the Test Page
on Apply check box.
Note: If the Test Page on Apply checkbox is selected, then every time the Apply button is
clicked, a test page will be sent to all the recipients. The test page is not sent out at any
other time. To deactivate this, deselect the checkbox.
9 Click Apply.
Accessing MC Component Version Information in OpenView
To help you with support issues, technicians sometimes must know the version numbers
of your MetaConsole components (server, service providers, and client).
MetaConsole Server and Service Provider Version Information
To determine version numbers for the MetaConsole server and service providers, follow this
procedure:
1 In the navigation pane, expand the MetaConsole server node, and click Version Informa-
tion.The Version Information screen opens (Figure 2.6).
Figure 2.6: OpenView Version Information Screen