Konica Minolta BIZHUB C30P User Manual
Page 33
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 19
from the MetaConsole directory on the CD.
•
HP-UX, Solaris, Linux:
a. Log in as root.
b. Execute sh ./install.bin from the MetaConsole directory on the CD.
3
The Setup Program screen opens. Click Next to continue.
4
Accept the Licensing Agreement. You cannot install and use MetaConsole if you do not
accept the agreement. Click Next.
5
Select a Typical or Custom installation from the drop-down menu. If you select Typical,
the following components will be selected:
MetaConsole Server
MetaConsole Snap-in for MMC
MetaConsole Snap-in for NetView
PageScope EMS Plug-Ins
Note
: The Konica Minolta PageScope EMS Plug-Ins will always be installed. You may not
customize these components.
6
If you select Custom in Step Five, select the component(s) you wish to install. Click Next.
7
Specify a Destination Folder. The default folders specified below are recommended:
•
Windows: C:\Program Files\PageScope EMS Plug-Ins
•
HP-UX, Linux and Solaris: /opt/PageScope EMS Plug-Ins
If you prefer a different folder, click Choose... and browse to the folder. When the selection
has been made, click Next.
8
[MetaConsole Server] Specify a TCP/IP port number. Click Next.
9
[Windows NT, 2000, 2003 and XP] [MetaConsole Server] If MetaConsole is to run as a
Windows NT, 2000, 2003 or XP service, select the Run as Service check box. Click Next.
10
If you chose to run MetaConsole as a Windows service, specify if it is to be started
automatically at system startup or manually, by clicking the appropriate radio button. Click
Next.
11
[Client for NetView] Enter the name/address of the MetaConsole server host that the
client for HP NetView will use. Optionally, specify a port number by following the name or
address with a colon and a number. For example, ServerMachineName:8080. When fin-
ished, click Next.
12
[Windows] [Client for NetView] Click Choose... then browse to the NetView Installation
Drive. For example, C:\ or D:\. Click Next.
13
The Pre-Installation Summary screen opens. This screen lists the installation options
you have selected. If any options are incorrect, click the Previous button to return back
and edit your selection(s). When you have completed this, return to the Pre-Installation
Summary screen, reverify your new settings, then click Install.