Konica Minolta BIZHUB C30P - Manual (Page 65)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 51
In two instances:
• When a service provider on both the preferred server and the manually added server
discover the same device and the provider of the manually added server has a higher
priority than the provider on the preferred server.
• When no provider on the preferred server discovers the device.
How can I manage devices on networks other than the local subnet?
the HP OpenView client must be configured to discover devices on the local subnet and the
other networks. For details about adding a server to the server list, see Chapter 3.
Another approach is to run an additional MetaConsole server on the remote network and add
the server. For details about adding a server to the list, see Chapter 3.
When the MetaConsole snapin is installed and the HP OpenView client is running but
no symbols are managed by the snapin, how should I configure the MetaConsole envi-
ronment?
Point a browser to the MetaConsole server (for example, http://myserver:8080). If the Meta-
Console snapin manages symbols in the HP OpenView maps, right-clicking the symbol dis-
plays menu options for configuring the MetaConsole environment.
When I double-click on a managed device in the HP OpenView, why doesn’t the browser
launch on HPUX?
The MetaConsole snapin for HP OpenView will launch the default browser when a managed
device is double-clicked. You must make sure the browser is your PATH.
Why doesn’t HP OpenView receive traps from my device?
If the MetaConsole server is running on the same machine as HP OpenView, the traps will be
intercepted by the MetaConsole server. If you want both HP OpenView and MetaConsole to
receive traps, they should be installed on different machines.