Konica Minolta BIZHUB C30P - Manual (Page 119)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 105
Configuring the Client
This chapter presents procedures for configuring the client’s behavior regarding Konica Minol-
ta devices managed through a MetaConsole server. At this level, you can configure the follow-
ing:
• Device Discovery
• Events that Trigger Alarms
• Rates and Timeouts
The Konica Minolta service provider’s configuration settings are maintained by the
MetaConsole server and are not client-specific. All clients use the same values. If any client
changes a particular setting, the change affects all clients that use that setting.
Specifying a Device Discovery Range
For each MetaConsole server, you specify ranges of IP addresses for automatic device dis-
covery.
Adding a Discovery Range
To add a range of IP addresses for device discovery, follow this procedure:
1 In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2 Click Discovery Ranges.
The Discovery Ranges screen opens (Figure 2.38).
Figure 2.38: Discovery Ranges Screen