Konica Minolta BIZHUB C30P - Manual (Page 120)

Configuring MetaConsole
page 106
3 Locate the Add New Discovery Range field. Enter the lowest IP address of the range in
the Start Address box.
4 Enter the highest IP address of the range in the End Address box.
5 Click Add.
Deleting a Discovery Range
To remove a range of IP addresses, follow this procedure:
1 In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2 Click Discovery Ranges.
The Discovery Ranges screen opens (Figure 2.38).
3 Locate the Auto Discovery Range List field. Click the start or end address of the range
to be removed.
4 Click Remove.
Specifying IP Address Ranges to Exclude from Device Discovery
It is not necessary to explicitly exclude a range of addresses since MetaConsole will not dis-
cover devices outside of the user-specified ranges. However, manually excluding a range can
sometimes be useful. For example, if you want MetaConsole to discover devices between
10.0.0.40 and 10.0.0.80 except for 10.0.0.52 through 10.0.0.56, you can include the large
range but exclude the small range.
Excluding a Discovery Range
To exclude a range of addresses from device discovery, follow this procedure:
1 In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2 Click Blocked Ranges.
The Blocked Ranges screen opens (Figure 2.39).