Specifying rates and timeouts – Konica Minolta BIZHUB C30P User Manual
Page 124
Advertising
Configuring MetaConsole
page 110
Figure 2.41: Alarm Management Screen
3
Select the check box for each alarm type you would like MetaConsole to generate.
4
Click Apply.
Specifying Rates and Timeouts
To set rate and timeout values:
1
In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2
Click Rates and Timeouts.
The Rates and Timeouts screen opens (Figure 2.42).
Advertising
This manual is related to the following products: