Device pages & nodes – Konica Minolta BIZHUB C30P User Manual
Page 129
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 115
Device Pages & Nodes
By expanding the node for a selected device, the user may monitor the following functions:
•
Status: This node provides a quick overview of the selected Konica Minolta system.
•
Component: This node provides information about the controller and the engine.
•
Printer Tray Status: This node provides information about the input and output paper op-
tions.
•
Settings: From this node, an administrator may enter and/or modify information specific to
a device.
•
Networking: Network settings can be entered from this node.
•
Protocol Diagnostics: Protocol diagnostic information may be viewed from this node.
•
Write Community: From this node a user may change the password for the write commu-
nity.
•
Host Utility: From this node a user may access a link that will launch a web page. The host
utility specific to the device will open on this page.
Descriptions about each of these functions follow.
Note:
The examples that follow list all the variables that may appear on a Device Page or
Node. Since devices vary, the device you are viewing may only have a portion of the infor-
mation presented in these discussions. For this reason, the screen images used as examples
in this section may not be identical to the screens you see when accessing information for
your particular device.