Konica Minolta BIZHUB C30P - Manual (Page 29)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 15
Placement of Components
You may install the client on as many computers as you like, as long as those clients can com-
municate with at least one MetaConsole Server. The client and server can be on the same
computer.
You may install the MetaConsole server on as many computers as you would like. A Meta-
Console server can service multiple clients. These clients can be of different types (browsers,
OpenView, NetView, MMC or Unicenter).
Installing MetaConsole and the PageScope EMS Plug-Ins
An Installation program will guide you through the process of installing MetaConsole.
To use the Installation program, follow this procedure:
1 Insert the MetaConsole CD.
2 Start the program:
• Windows: If the Installation program does not start automatically, run PSEMS.exe
from the MetaConsole directory on the CD.
• HP-UX, Solaris, Linux:
a. Log in as root.
b. Execute sh ./install.bin from the MetaConsole directory on the CD
3 The Setup Program screen opens. Click Next to continue.
4 Accept the Licensing Agreement. You cannot install and use MetaConsole if you do not
accept the agreement. Click Next.
5 Select a Typical or Custom installation from the drop-down menu. If you select Typical,
the following components will be selected:
MetaConsole Server
MetaConsole Snap-in for MMC
MetaConsole Snap-in for HP OV
PageScope EMS Plug-Ins
Note : The Konica Minolta PageScope EMS Plug-Ins will always be installed. You may not
customize these components.
6 If you select Custom in Step Five, select the component(s) you wish to install. Click Next.
7 Select a Destination Folder. The default folders specified below are recommended:
• Windows: C:\Program Files\PageScope EMS Plug-Ins
• HP-UX, Linux and Solaris: /opt/PageScope EMS Plug-Ins
If you prefer a different folder, click Choose... and browse to the folder. When the selection
has been made, click Next.