Konica Minolta BIZHUB C30P - Manual (Page 68)

Configuring MetaConsole
page 54
2 In the MC Server Address box, type the IP address of the MetaConsole server you are
adding to the list.
3 In the Port box, type the port number where the MetaConsole server is found.
4 Click Add.
The new server appears in the Server List box and in the navigation tree.
Removing a MetaConsole Server
To remove a MetaConsole server from the list, follow this procedure:
1 Display the appropriate MetaConsole client page in one of these ways:
• Point your browser to the MetaConsole server. In the navigation pane, expand the top-
level Configuration node and click Server Discovery.
• When a managed device is selected in NetView, select MetaConsole from the Tools
menu, then select MetaConsole Configuration. In the MetaConsole client’s naviga-
tion pane, click Server Discovery.
The Server Discovery screen opens (Figure 2.11).
2 In the Server’s box, click the address of the MetaConsole server you wish to remove from
the list.
3 Click Remove.
The server is removed from the list and from the navigation tree.
Specifying Alarm Notification Methods in NetView
The list of events that will trigger alarm notifications is configured individually for each service
provider at each MetaConsole server. How MetaConsole presents those alarms is determined
at the highest level of MetaConsole configuration.
To specify how MetaConsole notifies you of alarms, follow this procedure:
1 Display the appropriate MetaConsole client page in one of these ways:
• Point your browser to the MetaConsole server. In the navigation pane, expand the top-
level Configuration node and click Alarm Notification Methods.
• When a managed device is selected in NetView, select MetaConsole from the Tools
menu, then select MetaConsole Configuration. In the MetaConsole client’s naviga-
tion pane, click Alarm Notification Methods.
The Alarm Notification Methods screen opens (Figure 2.12).