Gradall 544D (9136-4003) Service Manual - Manual (Page 13)

Form No. 20220 z z z z z 544D-10 Owner/Operator Manual
2.1
INSIDE THE CAB
Located on forward/reverse lever
P/N 9116-3028
Located on lever knob
P/N 9108-3318
Located on dashboard
(Cummins Engines Only)
P/N 9114-3202
Located on lever knob
P/N 9108-3317
Located on dashboard
P/N 9108-3314
Located on joystick pedestal
P/N 9130-3047
Located on dashboard
P/N 9134-3016
Located on left cab wall
P/N 7733-3027
Located on dashboard
P/N 9116-3212
SAMPLE ONLY - USE CHART IN CAB
9134-3016
TURBOCHARGER DAMAGE CAN RESULT
FROM QUICK START-UP & SHUTDOWN.
FOR LONGER TURBOCHARGER LIFE
AND TO MINIMIZE TURBOCHARGER
DAMAGE, IDLE ENGINE AT LEAST
3-5 MINUTES AFTER START-UP
AND BEFORE SHUTDOWN.
9114-3202
STARTING AID INSTRUCTIONS
1. HOLD SWITCH ON FOR 3 SECONDS
TO FILL VALVE.
2. RELEASE SWITCH TO DISCHARGE
ETHER WHILE CRANKING ENGINE.
3. AS ENGINE STARTS, USE
ADDITIONAL ETHER AS REQUIRED
TO KEEP ENGINE RUNNING.
9130-3047
9116-3212
CERTAIN FORK/CARRIAGE COMBINATIONS MAY CAUSE
HANDLER TO TIP WHEN EXTENDED INTO "NO
OPERATION" ZONE AS NOTED ON CAPACITY CHART
WITH STABILIZERS UP CAUSING SERIOUS INJURY
OR DEATH. NEVER OPERATE MACHINE WITHOUT
CONSULTING PROPER CAPACITY CHART FOR THE
CARRIAGE/FORK COMBINATION BEING USED.
R
7733-3027
TRACTION LOCK SWITCH
9108-3314
DO NOT ENGAGE
WHEN WHEELS ARE
IN MOTION OR
ON IMPROVED
SURFACES. MACHINE
MUST BE IN 4
WHEEL DRIVE.
SWITCH LOCATED
ON FLOOR. SWITCH
HYDRAULICALLY
LOCKS FRONT AND
REAR WHEELS
TOGETHER FOR
INCREASED TRACTION.