Apple Final Cut Pro X (10.0.9) - Manual (Page 178)

Chapter 9 Edit audio 178
3 If you want to adjust the pan amount, do one of the following:
•
Type a value in the Pan Amount field.
•
Drag the Pan Amount slider left or right.
The Pan Amount settings vary according to the pan mode you choose.
Adjust surround sound using the Surround Panner
In the Audio inspector, you can use the Surround Panner to change the surround sound field or
make advanced adjustments using sliders.
Using the Surround Panner, you can change the panning levels by moving a control
that represents where the sound would appear to originate in an actual surround sound
speaker setup.
1 Choose a surround preset from the Pan Mode pop-up menu.
2 To open the Surround Panner, click the disclosure triangle next to Surround Panner in the
Volume and Pan section of the Audio inspector.
Click to display the
Surround Panner.
3 Do either of the following:
•
To make adjustments in the Surround Panner: Drag the control within the surround field to pan
toward or away from any of the surround channels (left, center, right, left surround, or right
surround) represented by the speaker icons. Click a speaker icon to turn it on or off.
Drag to move the
sound source.
To move the control back to the center position, double-click it.